NPS 8 Flange Dimensions
Outside diameter, thickness, bolt circle and bolting for every ASME B16.5 pressure class published in NPS 8 — Class 150 through Class 2500.
- Standard
- ASME B16.5
- Nominal size
- NPS 8
- Classes published
- 7
- Class 150 flange OD
- 13.50 in (342.9 mm)
- Class 150 bolting
- 8 × 3/4 in
Dimensions are given in inches, with the millimetre equivalent beneath in grey.
| Class | Flange OD | Thickness | Bolt circle | Bolting | Raised face OD | Rating @ 100 °F |
|---|---|---|---|---|---|---|
| Class 150 | 13.50342.90 mm | 1.1228.45 mm | 11.75298.45 mm | 8 × 3/4 in | 10.62269.75 mm | 285 psig |
| Class 300 | 15.00381.00 mm | 1.6241.15 mm | 13.00330.20 mm | 12 × 7/8 in | 10.62269.75 mm | 740 psig |
| Class 400 | 15.00381.00 mm | 1.8847.75 mm | 13.00330.20 mm | 12 × 1 in | 10.62269.75 mm | 990 psig |
| Class 600 | 16.50419.10 mm | 2.1955.63 mm | 13.75349.25 mm | 12 × 1 1/8 in | 10.62269.75 mm | 1480 psig |
| Class 900 | 18.50469.90 mm | 2.5063.50 mm | 15.50393.70 mm | 12 × 1 3/8 in | 10.62269.75 mm | 2220 psig |
| Class 1500 | 19.00482.60 mm | 3.6291.95 mm | 15.50393.70 mm | 12 × 1 5/8 in | 10.62269.75 mm | 3705 psig |
| Class 2500 | 21.75552.45 mm | 5.00127.00 mm | 17.25438.15 mm | 12 × 2 in | 10.62269.75 mm | 6170 psig |
Ratings are for A105 carbon steel at 100 °F and fall with temperature. Thickness excludes the raised face.
Length through hub
How far the flange stands off the joint, which is what a spool drawing needs. B16.5 carries hub length for Classes 150 and 300 only; above that the hub follows the bore and varies with the schedule the flange is ordered to.
| Class | Weld neck | Slip-on / threaded | Raised face height |
|---|---|---|---|
| Class 150 | 4.00101.60 mm | 1.7544.45 mm | 0.06 in (1.5 mm) |
| Class 300 | 4.38111.25 mm | 2.4461.98 mm | 0.06 in (1.5 mm) |
The pipe these flanges bolt to
NPS 8 pipe is 8.625 in (219.1 mm) outside diameter in every schedule, which is why one flange OD serves the whole range. Standard weight is a 0.322 in (8.2 mm) wall, giving a 7.981 in (202.7 mm) bore — the figure a weld neck flange in this size is normally bored to.
NPS 8 pipe dimensions in every schedule →
Flange types in this size
Common questions
What is the bolt circle of an NPS 8 flange?
Class 150 is 11.75 in with 8 × 3/4 in bolts; Class 300 is 13.00 in with 12 × 7/8 in bolts; Class 400 is 13.00 in with 12 × 1 in bolts; Class 600 is 13.75 in with 12 × 1 1/8 in bolts. The bolt circle grows with the class, which is why an NPS 8 flange of one class will not bolt to another.
Do all six flange types share these NPS 8 dimensions?
Yes. Flange outside diameter, thickness, bolt circle, bolt count and bolt size are set by NPS and class alone — a weld neck, slip-on, threaded, lap joint, socket weld and blind of the same size and class are dimensionally interchangeable at the bolted joint. What differs is how each attaches to the pipe.
How much bigger is a Class 2500 flange than a Class 150 in NPS 8?
21.75 in outside diameter against 13.50 in, and 5.00 in thick against 1.12 in — 4.5× the metal in the flange ring, plus heavier bolting on a wider bolt circle.