NPS 1 1/2 Standard (STD) Pipe
1.900 in (48.3 mm) outside diameter on a 0.145 in (3.7 mm) wall, giving a 1.610 in (40.9 mm) bore and 2.72 lb/ft (4.04 kg/m) empty. ASME B36.10M.
- Nominal size
- NPS 1 1/2 (DN 40)
- Schedule
- Standard (STD)
- Outside diameter
- 1.900 in (48.3 mm)
- Wall thickness
- 0.145 in (3.7 mm)
- Inside diameter
- 1.610 in (40.9 mm)
- Weight, empty
- 2.72 lb/ft (4.04 kg/m)
- Weight, water filled
- 3.60 lb/ft (5.36 kg/m)
- Flow area
- 2.036 in² (1313 mm²)
In NPS 1 1/2 this wall thickness is also designated Schedule 40. That is the same pipe under another name, not a different product — but the coincidence is specific to this size and does not hold across the range.
Every schedule in NPS 1 1/2
Dimensions are given in inches, with the millimetre equivalent beneath in grey.
| Schedule | Wall thickness | Inside diameter | Weight, empty | Water (US gal/ft) |
|---|---|---|---|---|
| Sch 5 | 0.0651.65 mm | 1.77044.96 mm | 1.271.90 kg/m | 0.128 |
| Sch 10 | 0.1092.77 mm | 1.68242.72 mm | 2.083.10 kg/m | 0.115 |
| Sch 40 | 0.1453.68 mm | 1.61040.89 mm | 2.724.04 kg/m | 0.106 |
| STD this page | 0.1453.68 mm | 1.61040.89 mm | 2.724.04 kg/m | 0.106 |
| Sch 80 | 0.2005.08 mm | 1.50038.10 mm | 3.635.40 kg/m | 0.092 |
| XS | 0.2005.08 mm | 1.50038.10 mm | 3.635.40 kg/m | 0.092 |
| Sch 160 | 0.2817.14 mm | 1.33833.99 mm | 4.867.23 kg/m | 0.073 |
| XXS | 0.40010.16 mm | 1.10027.94 mm | 6.419.54 kg/m | 0.049 |
Weight is plain-end carbon steel, w = 10.6802 × t × (OD − t) lb/ft.
Flanges for NPS 1 1/2 pipe
Flange dimensions are set by NPS and pressure class, not by schedule, so every flange below fits this pipe. The exception is the weld neck: its bore is machined to the pipe it is welded to, which for Standard (STD) means 1.610 in (40.9 mm). Order the flange to the schedule or the bores will not line up at the weld.
| Class | Flange OD | Thickness | Bolt circle | Bolting |
|---|---|---|---|---|
| Class 150 | 5.00127.00 mm | 0.6917.53 mm | 3.8898.55 mm | 4 × 1/2 in |
| Class 300 | 6.12155.45 mm | 0.8120.57 mm | 4.50114.30 mm | 4 × 3/4 in |
| Class 400 | 6.12155.45 mm | 0.8822.35 mm | 4.50114.30 mm | 4 × 3/4 in |
| Class 600 | 6.12155.45 mm | 0.8822.35 mm | 4.50114.30 mm | 4 × 3/4 in |
| Class 900 | 7.00177.80 mm | 1.2531.75 mm | 4.88123.95 mm | 4 × 1 in |
| Class 1500 | 7.00177.80 mm | 1.2531.75 mm | 4.88123.95 mm | 4 × 1 in |
| Class 2500 | 8.00203.20 mm | 1.7544.45 mm | 5.75146.05 mm | 4 × 1 1/8 in |
Fittings for NPS 1 1/2 pipe
ASME B16.9 dimensions come from NPS alone, so these figures hold for Standard (STD) exactly as they do for every other schedule in the size. Only the wall thickness has to be ordered to match.
| Fitting | Dimension | NPS 1 1/2 |
|---|---|---|
| 90° Long Radius Elbow | Centre-to-end A | 2.2557.15 mm |
| 90° Short Radius Elbow | Centre-to-end A | 1.5038.10 mm |
| 45° Long Radius Elbow | Centre-to-end B | 1.1228.45 mm |
| Straight Tee | Centre-to-end C and M | 2.2557.15 mm |
| Reducing Tee | Run centre-to-end C | 2.2557.15 mm |
| Concentric Reducer | End-to-end H | 2.5063.50 mm |
| Eccentric Reducer | End-to-end H | 2.5063.50 mm |
| Cap | Length E | 1.5038.10 mm |
Common questions
What is the inside diameter of NPS 1 1/2 standard (std) pipe?
1.610 in (40.9 mm). The outside diameter is fixed at 1.900 in (48.3 mm) by ASME B36.10M, and the 0.145 in (3.7 mm) wall takes 0.290 in off it — 0.145 in from each side — leaving that bore.
How much does NPS 1 1/2 standard (std) pipe weigh?
2.72 lb/ft (4.04 kg/m) empty, as plain-end carbon steel. Full of water it comes to 3.60 lb/ft (5.36 kg/m), because the bore holds 0.106 US gallons per foot. One short ton of this pipe is about 736 ft.
Does NPS 1 1/2 standard (std) pipe use special flanges or fittings?
No. Flanges and buttweld fittings are dimensioned from NPS, so NPS 1 1/2 hardware fits this pipe in any schedule. The one thing that does follow the schedule is the bore of a weld neck flange or a fitting end prep, which has to be 1.610 in (40.9 mm) to match.