NPS 6 Schedule 5 Pipe
6.625 in (168.3 mm) outside diameter on a 0.109 in (2.8 mm) wall, giving a 6.407 in (162.7 mm) bore and 7.59 lb/ft (11.29 kg/m) empty. ASME B36.10M.
- Nominal size
- NPS 6 (DN 150)
- Schedule
- Schedule 5
- Outside diameter
- 6.625 in (168.3 mm)
- Wall thickness
- 0.109 in (2.8 mm)
- Inside diameter
- 6.407 in (162.7 mm)
- Weight, empty
- 7.59 lb/ft (11.29 kg/m)
- Weight, water filled
- 21.56 lb/ft (32.09 kg/m)
- Flow area
- 32.240 in² (20800 mm²)
No other designation in NPS 6 shares this wall thickness, so Schedule 5 is unambiguous in this size.
Every schedule in NPS 6
Dimensions are given in inches, with the millimetre equivalent beneath in grey.
| Schedule | Wall thickness | Inside diameter | Weight, empty | Water (US gal/ft) |
|---|---|---|---|---|
| Sch 5 this page | 0.1092.77 mm | 6.407162.74 mm | 7.5911.29 kg/m | 1.675 |
| Sch 10 | 0.1343.40 mm | 6.357161.47 mm | 9.2913.82 kg/m | 1.649 |
| Sch 40 | 0.2807.11 mm | 6.065154.05 mm | 18.9728.24 kg/m | 1.501 |
| STD | 0.2807.11 mm | 6.065154.05 mm | 18.9728.24 kg/m | 1.501 |
| Sch 80 | 0.43210.97 mm | 5.761146.33 mm | 28.5742.52 kg/m | 1.354 |
| XS | 0.43210.97 mm | 5.761146.33 mm | 28.5742.52 kg/m | 1.354 |
| Sch 120 | 0.56214.27 mm | 5.501139.73 mm | 36.3954.16 kg/m | 1.235 |
| Sch 160 | 0.71918.26 mm | 5.187131.75 mm | 45.3567.49 kg/m | 1.098 |
| XXS | 0.86421.95 mm | 4.897124.38 mm | 53.1679.11 kg/m | 0.978 |
Weight is plain-end carbon steel, w = 10.6802 × t × (OD − t) lb/ft.
Flanges for NPS 6 pipe
Flange dimensions are set by NPS and pressure class, not by schedule, so every flange below fits this pipe. The exception is the weld neck: its bore is machined to the pipe it is welded to, which for Schedule 5 means 6.407 in (162.7 mm). Order the flange to the schedule or the bores will not line up at the weld.
| Class | Flange OD | Thickness | Bolt circle | Bolting |
|---|---|---|---|---|
| Class 150 | 11.00279.40 mm | 1.0025.40 mm | 9.50241.30 mm | 8 × 3/4 in |
| Class 300 | 12.50317.50 mm | 1.4436.58 mm | 10.62269.75 mm | 12 × 3/4 in |
| Class 400 | 12.50317.50 mm | 1.6241.15 mm | 10.62269.75 mm | 12 × 7/8 in |
| Class 600 | 14.00355.60 mm | 1.8847.75 mm | 11.50292.10 mm | 12 × 1 in |
| Class 900 | 15.00381.00 mm | 2.1955.63 mm | 12.50317.50 mm | 12 × 1 1/8 in |
| Class 1500 | 15.50393.70 mm | 3.2582.55 mm | 12.50317.50 mm | 12 × 1 3/8 in |
| Class 2500 | 19.00482.60 mm | 4.25107.95 mm | 14.50368.30 mm | 8 × 2 in |
Fittings for NPS 6 pipe
ASME B16.9 dimensions come from NPS alone, so these figures hold for Schedule 5 exactly as they do for every other schedule in the size. Only the wall thickness has to be ordered to match.
| Fitting | Dimension | NPS 6 |
|---|---|---|
| 90° Long Radius Elbow | Centre-to-end A | 9.00228.60 mm |
| 90° Short Radius Elbow | Centre-to-end A | 6.00152.40 mm |
| 45° Long Radius Elbow | Centre-to-end B | 3.7595.25 mm |
| Straight Tee | Centre-to-end C and M | 5.62142.75 mm |
| Reducing Tee | Run centre-to-end C | 5.62142.75 mm |
| Concentric Reducer | End-to-end H | 5.50139.70 mm |
| Eccentric Reducer | End-to-end H | 5.50139.70 mm |
| Cap | Length E | 3.5088.90 mm |
Common questions
What is the inside diameter of NPS 6 schedule 5 pipe?
6.407 in (162.7 mm). The outside diameter is fixed at 6.625 in (168.3 mm) by ASME B36.10M, and the 0.109 in (2.8 mm) wall takes 0.218 in off it — 0.109 in from each side — leaving that bore.
How much does NPS 6 schedule 5 pipe weigh?
7.59 lb/ft (11.29 kg/m) empty, as plain-end carbon steel. Full of water it comes to 21.56 lb/ft (32.09 kg/m), because the bore holds 1.675 US gallons per foot. One short ton of this pipe is about 264 ft.
Does NPS 6 schedule 5 pipe use special flanges or fittings?
No. Flanges and buttweld fittings are dimensioned from NPS, so NPS 6 hardware fits this pipe in any schedule. The one thing that does follow the schedule is the bore of a weld neck flange or a fitting end prep, which has to be 6.407 in (162.7 mm) to match.